Do you have a dxf for the backround and foreground? I have tried to upsize the backround but it doesn't line up for me.im new to this and am just learning our plasma machine.
Thanks for this file. My application called for more detail, but this was a massive head start. I figured someone might have use for the version I ended up with.
the DXF caused problems for someone in inkscape because the curves were segmented into a bunch of short line segments which had 8695 nodes on 4302 segments
inkscape probably has similar commands but here's how I fixed it in corel draw
1) select all
2) run join-curves
3) combine
4) node-reduce - level 10
5) set smooth type on all nodes
now it has 860 nodes on 34 segments
that's a simple fix but I also redrew it a little bolder and smoother (see next post)