Ready To Cut CNC Art

Objects Hexagonal Brazier

camo1280

member
Hello all,
a contribution to this site now......It is a brazier I created through a little trial and error, the design drawings etc are all my own.
I have included a few photos to save making instructions...... I used a 12 ton workshop press to do the sides, but they could be cut at the fold line and re welded at the right angle (angle gage included).
Once the 6 sides are together I held the base at the required height and tacked it in place.
I did this with 5mm mild steel. I'd be glad to see photos of what anybody else can make out of this.
Enjoy 20161203_153732.jpg 20161203_153754.jpg 20161203_134709.jpg 20161203_134750.jpg 20161203_134757.jpg 20161203_134750.jpg
 

Attachments

I should add that the other two brackets are designed to take a standard bbq rotisserie kit.....
 
Back
Top Bottom