Ready To Cut CNC Art

Animal Stark's Wolf - Game of Thrones

J3yk

member
Is there any fans =)

Winter is coming ...

IMG.jpg
 

Attachments

Do you have a dxf for the backround and foreground? I have tried to upsize the backround but it doesn't line up for me.im new to this and am just learning our plasma machine.
 
wat do i need to open file everytime i try 3d builder auto opens it and i dont want it to open there
 
Im using a peddinghaus cnc plasma with
Shopdata systems as the software to run the dxf everytime I scale the file it does not work.


Can some one here scale to size for me?
X left to right = 17 inch minimum
Y = 10 Inch Maxium

Any dimension close to these should work!.

Thanks
 
the DXF caused problems for someone in inkscape because the curves were segmented into a bunch of short line segments which had 8695 nodes on 4302 segments

inkscape probably has similar commands but here's how I fixed it in corel draw

1) select all
2) run join-curves
3) combine
4) node-reduce - level 10
5) set smooth type on all nodes

now it has 860 nodes on 34 segments

that's a simple fix but I also redrew it a little bolder and smoother (see next post)

starks_wolf1.jpg
 

Attachments

Back
Top Bottom