Machine Axis Orientation

Discussion in 'Plasmacam Retrofit' started by SignTorch, 4/26/14.

  1. SignTorch

    SignTorch Artist

    • Vinyl CuttingVinyl Cutting, CNC RouterCNC Router, Designer / ArtistDesigner / Artist, Hobby / PersonalHobby / Personal
    • Corel DrawCorel Draw, Adobe PhotoshopAdobe Photoshop, V-Carve ProV-Carve Pro
    Vidor, TX
    In this example, the machine is square, and the operating position is facing the carriage. So the carriage is X and the gantry is Y.

    The machine origin will be at near left, and the machine will home to far left where the limits are.

    If you have a rectangular machine and want the gantry to be X it will be better to get it working as described, and then change the axis orientation later.

    As mentioned, I moved the wire harness support and exit point to the far right, this image shows it at near left.

    click image to enlarge


Share This Page