Ready To Cut CNC Art

LAPD Badge

10-7Mo

registered
Hi there,
Anybody happen to have the LAPD badge in .dxf? I'm using vcarve pro and looking to route this onto a wooden flag. The size of the badge would be about 10" in height. Any help would be appreciated.
4ebdd7fd841c760865432fc078a8bbd0 (1).jpg
 
this is a hard one to carve. ended up using a 30 degree v bit set to a max depth of .07. Make sure you set you feed rate slower than normal with all these fine lines or you will get tear out
 

Attachments

Back
Top Bottom