These are some variations of a knockdown (no welding) fire pit DXF files. Also I made up 3 variations of the side plates, one with plain slots, one with bears, one with moose. It was designed for 1/4 inch thick material but it should work for thinner stock also. The "large is 37" and the "small is 31" across. You will need 1 bottom plate, 4 side plates and 4 supports. If there are any problems please let me know. Enjoy
Mike
Mike
Attachments
-
148.8 KB Views: 4,438
-
154.3 KB Views: 4,176